ACI Labs

Mukesh Chanderia

Mar 63 min read

Create Neighborship with OSPF & BGP // Endpoint with Vlan

We are using a nexus switch as a Neighbour of BL We will be creating neighborship with routed interface as well as through Vlan (SVI)...

Mukesh Chanderia

Jan 72 min read

Create BGP Neighborship with ACI with the help of vlan interface

This is very useful in a lab environment in which you could establish multiple BGP neighborship with single physical link between ACI &...

Mukesh Chanderia

Jan 11 min read

BGP Neighbourship

Let's check the output of our Nexus Switch with whom we are going to create BGP neighbourship with ACI. n9k# show run | section bgp...

Mukesh Chanderia

Jan 12 min read

Creating Endpoint (host) with the help of trunk port

Connectivity between NK9 and Leaf Port n9k# show lldp nei int eth1/25 Device ID Local Intf Hold-time Capability Port ID...

Mukesh Chanderia

Dec 29, 20232 min read

Advertise subnet from BD to Ex EPG and Route Tagging

Step 1: Let’s create AP1, BD1 & EPG1 along with the following subnets. 222.222.221.1/24 —> Advertise Externally 222.222.222.1/24 —>...

Mukesh Chanderia

Nov 5, 20232 min read

Lab2: Ping Two Endpoint (Host) connected to different EPG

Step 1: Take one more host say 6.6.6.2/24 Let’s assign 6.6.6.2/24 to interface eth1/21 of NX-Sw which is directly connected to eth1/11 of...

Mukesh Chanderia

Nov 3, 20232 min read

Lab1: Ping Endpoints (Host) to Gateway

Step 1: Let’s configure Host with ip 3.3.3.1/24 As I am using Nexus Switch whose interface eth1/9 is directly connected to Leaf2 int...